|
-
Unplug bidet before serving.
-
Clean bidet once a month.
-
If effectiveness decreases, clean the filter.
-
Click graphic to enlarge.
-
Use back button to return to graphic page.
|
|
- Clean the seat, lid and body
- Wipe them with a damp cloth to remove dust
- Then use a detergent dampened cloth to sanitize them
- Dry off the detergent with a dry cloth
|
|
- Do not pour or splash water on the bidet.
|
 |
- If spray nozzle is stained
- Pull it forward and clean gently with a tooth brush
- Use a mild detergent
|
Click to Enlarge |
HI-2000/2001
Cleaning the Filter - If the water stream pressure drops, the filter may be clogged. Follow the steps below to clean the filter:
- Close the shutoff valve and flush the toilet.
- Remove the filter from the bottom of the control panel/external tank.
- Clean the filter screen gently with a toothbrush
- After cleaning, put the filter back in place.
- Tighten the water drain plug to secure.
|
Click to Enlarge
|
HI-3000/3001 - HT- 4000/4001
Cleaning the Filter - If the water stream pressure drops, the filter may be clogged. Follow the steps below to clean the filter:
- Close the shutoff valve and flush the toilet.
- Remove the plate on the rear of the bidet, turn the water drain plug counterclockwise, and pull out the filter.
- Clean the filter screen gently with a toothbrush
- After cleaning, put the filter back in place.
- Tighten the water drain plug to secure.
|
Click to Enlarge |
Procedure for draining bidet seats when bidet will unused for two months of more:
- Power needs to be ON.
- Push the "wash" button and exert pressure on the pressure activated switch at the same time.
- Switch is located on the opposite side of the control panel, at the junction between the seat and the lid. It activates the bidet system thus allowing the nozzles to work.
- Now, the bidet system will drain itself via the water nozzle.
|
Click to Enlarge |
Procedure for draining bidet seats when bidet will unused for two months of more:
- Unplug power
- Close the shutoff valve
- Water Drainage: HI-2000/2001 -- Remove the drain plug on the bottom of the control panel/external tank to drain.
- When water is completely drained, replace and tighten the drain plug.
- Water Drainage: HI-3000/3001 -- 4000/4001 -- Note that the water tank is located behind the seat. Turn the drain lever to the right to empty tanks and reverse action when tank is empty.
- Remove the bidet power plug from the electrical outlet. In order to prevent an electrical shock, dry hands and surrounding area before unplugging the AC cord.
|
